Prominent Premium Gloss Enamel is a premium quality gloss coating for interior and exterior use. The high quality gloss finish with high hiding power ensures it is very durable and can be washed or scrubbed without leaving dull patches. It is easy to apply on cement plaster, metal, wood or previously painted surfaces and dries to a smooth luxurious gloss finish.
Prominent Premium Gloss Enamel is available in white and clear tint base in pack sizes: 1lt , 5lt and 20lt and standard colours in pack sizes of 1lt & 5lt.
Black, White and colours as per latest colour card - Tint bases to tint most of the colours on the tint sytem.
Please note: Every care has been taken to ensure that the colours displayed on this website reflect the actual paint colour as accurately as possible. Colours may vary due to your screen settings and resolution. Always consult a Prominent Paints colour card or stripe card before making your final colour choice.
Appearance: High gloss.
Spreading Rate: 10 - 12 m²/l dependent on surface texture and porosity.
Solids: ± 68% by mass and ± 40% by volume.
Density: ± 1,13 kg/litre.
Recommended Dry Film Thickness: 2 coats at 40µm per coat minimum.
Viscosity: ± 65 Kµ.
Flash Point: 45°C.
Available Sizes: 1Lt, 5Lt, 20Lt
Colours: Black, White and colours as per latest colour card - Tint bases to tint most of the colours on the tint sytem.
Life Expectancy: 12 years for specified interior and exterior applications.
Respecting The Environment:
Initial - 4 hours, Hard dry - 16 hours.
Note: Higher temperatures will accelerate the drying times (approximately halved for every 10°C increase), whilst lower temperatures will retard the drying time (approximately doubled for every 10°C decrease).
For new work or change in colour, apply two coats.
Sound matt emulsion paint:
Sound sheen emulsion paint:
Poor condition surface:
The tint base containers are only filled to levels which are specific for each tint base to allow the calculated volume of colourant to be added in order to achieve the volume indicated on the container after tinting. Tint bases and colourants are unfinished products which should not be used on their own. Only once the prescribed colourant is added to the specific tint base will the finished product comply with the technical features and related information as set out in this TDS.
Colourant to be used:
Prominent colourants are lead free specifically formulated for use with Prominent Pro-Matic tinting system. ICC colourants which are lead free using only Prominent supported formulations on Largo 2000.
Pastel Base and Clear Base.