Prominent Premium Satin Silk is a premium quality fully washable acrylic with a soft, luxurious satin smooth finish. Formulated for use on interior and exterior surfaces such as walls, wood, fascias and steel. It is extremely durable, hardwearing, fully washable and stain resistant. Simply wipe away any dirt.
Prominent Premium Satin Silk is available in white, pastel tint base and clear tint base in the following sizes: 1lt , 5lt and 20lt
White, pastel colours can be eye tinted.
Spreading Rate: 6 - 10 m²/litre, dependent on surface texture and porosity.
Solids: ± 55% by mass and 35% by volume.
Density: 1,35 kg/litre.
Recommended Dry Film Thickness: 2 coats at 35 µm per coat minimum.
Viscosity: ± 100 Kµ
Flash Point: Non-flammable
Available Sizes: 1Lt, 5Lt, 20Lt
Colours: White and colours as per colour card. Tint bases to tint most of the colours on the tint system.
Life Expectancy: 12 years, interior & exterior.
Calculated Maximum VOC: 16g/L maximum for white and pastel tinting base and selected standard colours.
Respecting The Environment:
Temperature between 5°C and 40°C. Relative humidity of less than 85%, preferably between 10:00 and 16:00. Ideally apply when the temperature of the substrate is at least 2°C above dew point. If possible away from direct sunlight.
Touch dry - 1 hour at 23°C. Note: Higher temperatures will accelerate the drying times (approximately halved for every 10°C increase), whilst lower temperatures will retard the drying time (approximately doubled for every 10°C decrease).
4 hours at 23°C.
Exterior cement plaster and fibre cement:
Poor condition surfaces:
The tint base containers are only filled to levels which are specific for each tint base to allow the calculated volume of colourant to be added in order to achieve the volume indicated on the container after tinting. Tint bases and colourants are unfinished products which should not be used on their own. Only once the prescribed colourant is added to the specific tint base will the finished product comply with the technical features and related information as set out in this TDS. The calculated max VOC compliance < 16g/L is only applicable to product tinted from Pastel Base excluding Clear Base.
Colourant to be used:
Prominent colourants are lead free specifically formulated for use with Prominent Pro-Matic tinting system. ICC colourants which are lead free using only Prominent supported formulations on Largo 2000.
Pastel Tint Base and Clear Tint Base.