White and colours as per latest colour card. Tint bases to tint most of the colours on the tint system.
Please note: Every care has been taken to ensure that the colours displayed on this website reflect the actual paint colour as accurately as possible. Colours may vary due to your screen settings and resolution. Always consult a Prominent Paints colour card or stripe card before making your final colour choice.
Appearance: High gloss.
Spreading Rate: 6 - 8 m²/litre dependent on surface texture and porosity.
Solids: ± 66% by weight and ± 55% by volume.
Density: ± 1,16 kg/litre.
Recommended Dry Film Thickness: 2 coats at 60 µm per coat minimum
Viscosity: ± 70 Kµ.
Flash Point: 43°C.
Available Sizes: 1Lt, 5Lt
Colours: As per latest colour card - Tint bases to tint most of the colours on the tint system.
Respecting The Environment:
Surface dry: 1-2 hours, Hard dry: 4-6 hours.
Note: Higher temperatures will accelerate the drying times (approximately halved for every 10°C increase), whilst lower temperatures will retard the drying time (approximately doubled for every 10°C decrease).
Recoating time: 18 hours at 23°C.
Requirements: Two coats.
Cement surface (new and old):
Painted surface in good condition:
Painted surface in poor condition:
The tint base containers are only filled to levels which are specific for each tint base to allow the calculated volume of colourant to be added in order to achieve the volume indicated on the container after tinting. Tint bases and colourants are unfinished products which should not be used on their own. Only once the prescribed colourant is added to the specific tint base will the finished product comply with the technical features and related information as set out in this TDS.
Colourant to be used: Prominent Paints colourants are 100% Lead Free specifically formulated for use with Prominent Paints Pro-Matic tinting system.
Tint Bases: Clear Tint Base.