Prominent Paints
Prominent Paints - More than just paint
Prominent Paints - More than just paint

PRODUCTS

RANGES

  • High Performance
  • Premium
  • Ultra
  • Neutron
  • Select Range
  • Speciality
  • Woodpro
  • Industrial
  • Trade
  • Effects
  • Primalex


BY APPLICATION

  • Interior
        Ceilings
        Other
        Trims
        Walls
        Wood
  • Exterior
        Ceilings
        Other
        Trims
        Walls
        Wood
  • Roof & Floor
        Paving
        Roof
        Roof & Paving
        Stoep
        Workshop Floor
  • Industrial
  • Wood
        Other
        Paint
        Sealer
        Varnish
  • Decorative Effects
  • Waterproofing
  • Interior & Exterior
        Ceilings
        Other
        Trims
        Walls
        Wood
  • Primers


Find a Store
Paint Calculator

Previously Painted – Rhinoboard, Asbestos and Concrete


Previously Painted – Rhinoboard, Asbestos and Concrete

Determine the condition of the surface and what type of paint was previously applied. If fungi growth is evident, wash down with PROGOLD FUNGAL WASH/Water solution 1:10 using a 3M Scotch Pad, rinse with clean water and leave to dry. Where paint has peeled leaving an indentation after scraping off, apply one coat of PROMINENT PLASTER PRIMER to the area (16 hours drying time), fill area with PROGOLD READYMIX CRACK FILLER (drying time depends on thickness of application) and when dry, apply one coat of PROMINENT PLASTER PRIMER over the PROGOLD READYMIX CRACK FILLER (16 hours drying time), then:

  • Sand down with 80 Grit sandpaper.
  • Remove sanding residue with a damp cloth.
  • Check nail heads and steel cover strips and if rust is evident, apply two coats of PROMINENT ULTRA PRIME (6 hours drying time between coats and then do measle corrosion inspection after 24hours).
  • NB. If measle corrosion is visible after 24hours apply a further 2 coats of PROMINENT ULTRA PRIME.
  • NB.Do not sand between coats.
  • Fill all holes/cracks with PROGOLD READYMIX CRACK FILLER and spot prime when dry with PROMINENT PLASTER PRIMER (16 hours drying time).
  • Fill any gaps between ceiling boards and cornices, and between cornices and walls with Acrylic Gap Filler/Acrylic Polyurethane sealer.
  • Where water marks appear, apply a coat of PROMINENT UNIVERSAL UNDERCOAT (18 hours drying time) and where dampness appears on concrete ceilings apply a coat of PROMINENT DAMPCURE (24 hours drying time) after removing all paint to bare substrate.
  • If an acrylic paint was used previously, apply two coats of Acrylic PVA paint e.g. , PROMINENT PROMODEK, PROMINENT PREMIUM MATT (6 hours drying time between coats). If an oil based paint was used previously, apply two coats of an oil based paint (16 hours drying time between coats). Clean oil based applicators with Turpentine.
  • Where there is a steam or moisture atmosphere, apply one coat of PROMINENT UNIVERSAL UNDERCOAT (18 hours drying time) followed by two coats of PROMINENT PREMIUMEGGSHELL ENAMEL/PROMINENT PREMIUM NON DRIP ENAMEL. PROMINENT ULTRA SHEEN/ULTRA MATT ANDPROMINENT ULTRA GLOSS (24 hours drying time between coats).